Wheel alignment · Orlando

Wheel Alignments

Camber, caster, and toe corrected to factory spec.

Manufacturer & Industry CertifiedHonda · Acura · Infiniti · Hyundai · Ford · Lincoln · FCA · I-CAR Gold ClassSee all certifications →

After a collision, a lot of attention goes to the panels you can see — but the parts you can’t see often matter just as much. A hard impact, a curb strike, or a deep pothole can knock your suspension and steering geometry out of spec, and that shows up as a car that pulls, a steering wheel that sits crooked, or tires that wear out long before they should. At Collision Center Orlando, a precise wheel alignment is part of putting your vehicle back the way it was built to drive.

Why alignment matters after a collision

Even a moderate impact can shift suspension components by a few fractions of a degree — enough to change how your tires meet the road. A proper post-collision alignment measures the three angles that control handling and tire wear: camber, caster, and toe. When any of those drift out of factory range, you feel it as drifting, vibration, or a wheel that fights you on a straight Orlando road.

Left unaddressed, misalignment quietly costs you. Uneven tire wear, reduced fuel economy, and added stress on steering and suspension parts all trace back to geometry that’s even slightly off. Correcting it early protects both your tires and the repair work underneath them.

What Our Alignment Service Includes

We use computerized measuring equipment to compare your vehicle’s current geometry against the manufacturer’s published specifications, then adjust it back into range. A typical alignment with us covers:

  • A full inspection of tires, steering, and suspension components for damage or wear
  • Precise measurement of camber, caster, and toe on all applicable wheels
  • Adjustment of each angle back to the factory specification for your make and model
  • A check for tracking and tire wear patterns that point to deeper suspension issues
  • A road-feel verification so the steering wheel sits centered and the vehicle tracks straight

Each angle is corrected to the automaker’s published OEM specifications — never a generic “in the green” range — which helps keep your factory warranty protected.

If we find a bent or worn component during the inspection, we’ll show you what we found and explain it plainly before any further work is discussed.

If your car pulls, vibrates, or wears tires unevenly, call (321) 972-1549 and get it tracking straight again.

A crooked steering wheel is the geometry talking. We set it back to the factory numbers.

A uniformed Collision Center Orlando technician with wheel alignment and precision measuring equipment

Precision alignment & measuring

More services

Explore more of what we do

Auto Painting & Refinishing

Computer color-matched refinishing in a controlled downdraft booth.

Collision Repair

Factory-spec structural, body, and paint repair after an accident.

ADAS Calibrations

Cameras, radar, and driver-assist sensors recalibrated to OEM spec.

Ceramic Coatings

Lasting paint protection that locks in a fresh finish.

Auto Detailing

Interior and exterior detailing — plus a delivery detail on every repair.

Scratch & Dent Repair

From paintless dent removal to color-matched refinishing.

Structural & Frame Repair

Computerized measuring and frame straightening to OEM tolerances.

Insurance Claim Assistance

We negotiate your claim and coordinate towing and rental.

Most repairs are insurance-paid — we handle the claim, towing, and rental. How claims work

Ready to start your repair?

Call the shop or start your free estimate — it takes about 60 seconds.